How To Properly Maintain The Stainless Steel Bathroom Cabinet

  • Daily maintenance of Stainless Steel Bathroom Cabinet :
    1. The general grease stain can be sprayed with a dry towel; it is forbidden to use a high concentration or corrosive solvent to scrub.

    1. When cleaning the stainless steel surface, care must be taken not to cause surface scratching. Avoid using washing liquid containing bleaching ingredients and abrasives. To remove the washing liquid, rinse the surface with clean water at the end of washing.

    3, stainless steel surface with dust and easy to remove dirt, can be washed with soap, weak detergent or warm water.

    1. If the surface of the stainless steel has a trademark, a film, and a weak detergent with warm water, the binder component is scrubbed with a fine spray or an organic solvent (ether, benzene, etc.).
    2. If the surface of the stainless steel is sticky with grease, oil or lubricating oil, wipe it off with a soft cloth; then clean it with a neutral detergent or ammonia solution.
    3. If the surface of the stainless steel has bleaching agent and various acid additives, it should be washed immediately with water, then with ammonia solution or neutral carbonated soda aqueous solution, and washed with neutral detergent or warm water.
    4. If there is a rainbow pattern on the surface of stainless steel, it is caused by excessive use of detergent or oil. Wash it with warm water detergent.
    5. The rust caused by the dirt on the stainless steel surface can be washed with 8% nitric acid or grinding detergent, or with special detergent medicine.
    6. Please clean with a soft cotton cloth or fluffy cloth during maintenance. Do not use steel balls or rough brush to avoid damage to the surface of the product.
    7. Metal fittings are added to the active parts every half year to add lubricant maintenance. As long as we use the correct maintenance method, we can extend the service life of stainless steel and keep it clean, bright and gorgeous.