Stainless Steel Sink Manufacturers Shares The Process Of Making

  • The change of the austenite molecular structure caused by the stainless steel material during processing or high-temperature welding, the increase of stress and the reduction of corrosion resistance. The solution treatment can solve this problem well, restore the material to its original performance, and restore its ductility and corrosion resistance. In fact, stainless steel must be processed from the cold rolling of steel mills. What are the following Stainless Steel Sink Manufacturers to share the production process of the sink?

    The advantages of the overall stretching process are 1. Material saving and cost saving. 2, from the design shape, can produce a specially shaped sink, beautiful and generous. 3, no welding, and the use of solution treatment to enhance the performance of stainless steel.

    The butt welding process is to stretch two single grooves, each of which is flattened by two sides, and then welded together, and then the panel is integrally formed. The drawing equipment is required to be the same as the welding water tank, and the welding equipment is selected by argon arc welding.

    There are also different ways to deal with the manufacturing process, as well as the surface treatment. There are currently five types: sanding, sandblasting, polishing, embossing, and crystal shot blasting. Among them, the frosted drawing basin is the original color of stainless steel, and its advantage is that it is more and newer. Drawing is actually grinding with a grinding wheel; the blasting and electroplating pot has the effect of pearl matte, its advantage is that it is not oily, and it is very beautiful. It should be said that it is more oil-proof, but it can't keep up with the wear resistance. Embossing and crystal shot blasting; polishing, is the most easily scratched pot, looks good, the most headache, the ugliest. Therefore, it is basically used in the country; embossing is made of embossed material, but its cost is relatively high, it is very wear-resistant. Crystal shot blasting combines many advantages, so I think the ideal surface treatment method is crystal shot blasting.

    The corners of stainless steel sinks on the market are handled in a variety of ways, including flat square corners, rounded corners, thin edges, beveled edges, and floating edges. Among them, the square corner can be used as an above counter basin or as an under the counter basin, but because it is a square corner, on the one hand, the viewing angle is not very good, and its carrying weight is not very strong, plus it is in the process of transportation. It is easy to fold the corners, so it is used less; the flanges, on the one hand, enhance the flatness of the sink, on the other hand, the ribs make the sink load stronger, and have a good water retaining effect, not letting The water flows to the countertop, and many sink manufacturers like this technology, but it must be double-layered to have an effect. You can see it in the market, many of which are unilateral. At the same time, the sides of the high-grade stainless steel sink are generally flat and have no large curvature.

    Some of the paints on the market are sprayed with a variety of paints of different colors and materials, claiming to prevent sweat and moisture absorption. In fact, the main purpose of spraying the coating on the bottom of the sink is to prevent temperature condensation and protect the cabinet. At the same time, it can reduce the noise of falling water. Moisture absorption is only a secondary function or a different statement. Quick-frozen foods are placed in the sink or in the wet weather in spring and summer. Because the temperature of the water tank is low, the water will collect the water at the bottom of the basin. Dropping water drops can cause the cabinet to get wet. Spraying a suitable coating on the bottom of the sink may reduce or even eliminate the temperature difference and destroy the formation of water droplets. The high-quality coating also has a certain moisture absorption function to protect the cabinet from flooding. However, most of the bottoms of the sinks on the market are ordinary paints, which do not absorb moisture, and the anti-dew function is not large, just swaying.