What Are The Tips For Stainless Steel Sink Manufacturers To Sha

  • When we renovated the house, we started to buy furniture, but the new house needs to buy a lot of furniture. Let’s start with the sink. The sink brings great convenience to our life. If everyone If you don't understand it, the Stainless Steel Sink Manufacturers will tell you how to buy the sink correctly!

    1. The thickness of the steel plate of the stainless steel sink is about 0.8-1.2mm. You can choose 304# stainless steel. This kind of sink is tougher and can avoid the damage caused by impact on the limit. Press firmly on the surface of the sink to see if it is strong. If it can be pressed, the material is very thin and should be carefully selected.
    2. The optional sink can also be analyzed by the molding process. The stainless steel sink has three forming processes, namely the wheel welding method, the butt welding method, and the integral molding method. Each of the three processes has advantages and disadvantages, in which the integral stretching cost is low, the deformation is not easy, and the problem of the virtual welding does not occur. However, the integral stretch forming process is difficult to ensure the thickness of the sink, the bearing capacity is not good enough, and the panel is not flat enough. The wheel welding process is to separately manufacture and weld the panel and the groove body. The molding quality is high and the panel is the flattest. A variety of water tank styles can be produced. The disadvantage is that the production cost is high.