Stainless Steel Sink Manufacturers Shares Sink Installation Det

  • Stainless steel sinks are available in almost every household, but you know that there is a lot of knowledge about simple sinks. The following Stainless Steel Sink Manufacturers will share the details of the sink installation:
    1.the sink is installed in the kitchen renovation
    The installation of the sink should be left at the end of the kitchen renovation. The installation of the sink is not a big project. Prepare the sink for the prepared items and install them. After the sink is ready, install the installer directly.

    1. The water pipe must be drained during installation.
      It is necessary to drain the water from the water pipe before installing the water tank. If the water of the water pipe is not drained during installation, it will cause water leakage and rust in the water tank in the future.
    2. the faucet must be firm when installed
      This point is very important for everyone to pay attention to, when installing the sink must pay attention to the firmness of the joint, but also pay attention to the location of the hot and cold water pipes, do not make a mistake. If the installation is not strong, there will be gaps near the sink, causing water leakage.

    4.need to be cleaned after installation
    The sink must be cleaned after the installation is completed, and the debris during installation should be thoroughly rinsed. In addition, the smudges that are easy to see in the daily sink can be treated like this. The sink should be cleaned with warm water, washing liquid and soft cloth after use. The usual stains can be removed immediately; the usual stains such as garbage and cream are slightly polluted and should not be used. Use a strong detergent to clean; foods that easily contaminate the sink, such as tea, coffee, juice, etc., should be washed immediately with water or detergent to prevent alkaline deposits from remaining in the sink.